Drives for sliding gates SLIDING-1300PRO and SLIDING-2100PRO

Electromechanical drives of the SLIDING-1300PRO and SLIDING-2100PRO series are designed for automation of domestic and industrial sliding gates weighing up to 1,300 and 2,000 kg, respectively.

Application:

Sliding gates of any type
Sliding gates with any infill options

Order with installation

Advantages

The pedestrian passage function allows the gate to be opened one meter for users to pass through if there is no gate.

The built-in control unit allows you to connect many additional accessories and configure the most popular functions.

In the event of a lack of electricity, the drive has a built-in release, which allows you to open the gate manually.

The gear motor is equipped with high-quality grease, which allows it to operate in low temperatures.

The pedestrian passage function allows the gate to be opened one meter for users to pass through if there is no gate.

The built-in control unit allows you to connect many additional accessories and configure the most popular functions.

In the event of a lack of electricity, the drive has a built-in release, which allows you to open the gate manually.

The gear motor is equipped with high-quality grease, which allows it to operate in low temperatures.

Design

OPERATOR DESIGN

Ergonomic separate housing

Special release mechanism

Secure fastening to mounting base

Equipment

Standard

Optional

Operator, magnetic limit switches, hardware

Transmitter-2PRO-Black remote control operates two devices

Transmitter-4PRO-Black remote control operates four devices

Transmitter-4 remote control operates four devices

Transmitter-4 (Color) remote controls of different colours operating up to four devices

Transmitter-Premium having steel housing can operate up to four devices

Car-Transmitter remote control working on cigarette lighter can operate two devices

Command-433 wireless button to control two devices

KEYPAD series code keypad controls gate operator equipped with internal or external DoorHan receiver

Turning off KEYSWITCH-N transmits a controlling signal to the control block of an automatic device

Anti-vandal code keypad Ref: KEYCODE series controls automatic devices. It can be used as an outdoor keypad or a proximity-card reader

GSM-module receives a mobile phone signal and transmits a control signal to actuate the operator or barrier

External DHRE-1 receiver controls other manufactures’ automatic devices with DoorHan remote control

Wi-Fi-module for wireless control of the gate operator (control signal, NO)

Lamp-PRO-series LED lamp with antenna to signal the gate movement

Photocell-N safety photocells consisting of infrared transmitter and receiver

Wireless Photocell-W safety photocells consisting of infrared transmitter and receiver

Sirena giving an audio warning about the gate movement

Heating device for gate and barrier operators working under extreme low temperature conditions

Technical description

Construction

Specifications

Operating Conditions

Operator body cover
Control board
Reducer housing
Limit switch reader
Stator
Condenser
Gear
Mounting angle cover
Mounting angle
Release
Release key
Body cover fastening screws

Parameter	Value	Notes
Maximum gate weight, kg	1 300/2 100
Supply voltage, V	220
Maximum force, N	900/1 350
Power, W	550/800
Operating temperature range, °С	-40...+55
Maximum effective torque, N·m	27,5
IP protection class	54
Intensity of use	70

Install the gate operator only on properly balanced and lubricated gate.

Make sure the gate operator specifications correspond to local climatic conditions.

Never install this operator in hazardous locations.

Make sure no objects will get jammed between movable and stationary parts of the operator.

Use only DoorHan accessories to prevent gate operator damage.

Never leave the gate operator disengaged.

Never use the gate operator if any repair or adjustment needs to be done.

Activate gate only when there are no obstructions preventing its travel.

Walk or drive through the opening only when the door is fully opened and stopped. The operator must be on stop.

Never permit children to operate or play with gate control push buttons or remote control transmitters.

Do not make any changes to automatics of the operator.

Warranty print

DoorHan warrants the gate operator to work properly for a period of 3 years from purchase date. Dealer may change the warranty period.