Drives SHAFT-120 and SHAFT-200 for industrial sectional doors

Electromechanical shaft drives SHAFT-120 and SHAFT-200 are designed for automation of heavy industrial sectional doors with high, vertical and inclined lift types.

Application:

Fireproof and industrial sectional doors
Sectional doors (any type)

Order with installation

Advantages

With the help of an emergency manual drive, which is included in the basic package, you can open and close the gate manually in case of power outages.

To improve the accuracy of gate stopping, the drive design uses main and backup limit switches.

The drive can be installed in two different planes for ease of use.

The gear motor, located in an “oil bath,” has a long service life.

With the help of an emergency manual drive, which is included in the basic package, you can open and close the gate manually in case of power outages.

To improve the accuracy of gate stopping, the drive design uses main and backup limit switches.

The drive can be installed in two different planes for ease of use.

The gear motor, located in an “oil bath,” has a long service life.

Design

OPERATOR DESIGN

Operator body with heat protection

Built-in control unit

Chain reducer

Equipment

Standard

Optional

Operator with built-in control unit, hardware

PHOTOCELL-N safety photocells consisting of infrared transmitter and receiver

Wi-Fi-module for wireless control of the door operator (control signal, NO)

TRANSMITTER-2PRO-BLACK remote control operates two devices

GSM-module receives a mobile phone signal and transmits a control signal to actuate the operator or barrier

TRANSMITTER-4PRO-BLACK remote control operates four devices

TRANSMITTER-4 remote control operates four devices

TRANSMITTER-PREMIUM having steel housing can operate up to four devices

CAR-TRANSMITTER remote control working on cigarette lighter can operate two devices

COMMAND-433 wireless button to control two devices

KEYPAD series code keypad controls door operator equipped with internal or external DoorHan receiver

Turning off KEYSWITCH-N transmits a controlling signal to the control block of an automatic device

Anti-vandal code keypad Ref: KEYCODE series controls automatic devices. It can be used as an outdoor keypad or a proximity-card reader

External DHRE-1 receiver controls other manufactures’ automatic devices with DoorHan remote control

LAMP-PRO-series LED lamp with antenna to signal the door movement

Traffic-light-LED to provide safe entering and exiting of the facility

Sirena giving an audio warning about the door movement

DH-SENSOR-KIT pneumatic safety edge ensuring safe operation of sectional doors

Technical description

Construction

Specifications

Operating Conditions

Release cord
Chain
Reducer housing
Limit switches
Gear motor
Control unit
Manual drive unit

Parameter	Value	Notes
Door area, sqm	40
Supply voltage, V	380
Torque, Nm	120
Motor, V	380
Operating temperature range, °С	-30...+55
Motor rotational speed, rev/min	1 400
IP protection class	44
Intensity of use	65

Install the door operator only on a properly balanced and lubricated garage door.

Make sure the door operator specifications correspond to local climatic conditions.

Never install this operator in hazardous locations.

Make sure no objects will get jammed between movable and stationary parts of the operator.

Use only DoorHan accessories to prevent door operator damage.

Never leave the door operator disengaged.

Never use the door operator if any repair or adjustment needs to be done.

Activate door only when there are no obstructions preventing door travel.

Walk or drive through the opening only when the door is fully opened and stopped. The operator must be on stop.

Never permit children to operate or play with door control push buttons or remote control transmitters.

Do not make any changes to automatics of the operator.

Warranty print

DoorHan warrants the door operator to operate properly for a period of 3 years from purchase date. Dealer may change the warranty period.