en
Catalog
Home
Catalog
Contacts
en
Callback Dealer account
daily
+420 474 319 111
Sectional doors
Roller shutters and roller doors
Industrial equipment
Steel entrance doors
Automation
Automation for roller shutters
Catalog
DSHINF Inflatable Dock Shelter

DSHINF Inflatable Dock Shelter

Sectional doors
Roller shutters and roller doors
Industrial equipment
Steel entrance doors
Automation
Automation for roller shutters
DSHINF inflatable dock shelters are used at the loading docks of warehouses and food manufacturing plants equipped with freezing rooms where keeping strict control of temperature at the desired level is crucial. During loading/unloading operations a trailer partially backs into the dock shelter while top and side air bags inflate around the top and sides of the truck body providing tight sealing. When not in use, the air bags deflate. This dock shelter can be controlled from a dock leveler control unit having special function of shelter operation control. It’s highly recommended to install wheel guides and shock columns in front of the loading dock when using this type of shelter. The shelter is mounted using the suspended method of installation.
Application:
  • Warehouses, cold storage, food manufacturing plants
Order with installation
Order with installation
Order with installation
Equipment
Standard
Optional
Side airbag

Side airbag

Front airbag

Front airbag

Top airbag extension 1 200 mm

Top airbag extension 1 200 mm

Wheel guides

Wheel guides

Safety fences

Safety fences

Shock column

Shock column

Molded rubber bumpers 250 × 250 × 100 mm. Standard. Product number BR250 × 250 × 100. Ensure safe truck reversing into the loading dock, protect the building walls. For mounting dimensions, please, refer to drawings

Molded rubber bumpers 250 × 250 × 100 mm. Standard. Product number BR250 × 250 × 100. Ensure safe truck reversing into the loading dock, protect the building walls. For mounting dimensions, please, refer to drawings

Molded rubber bumpers 450 × 250 × 100 mm. Standard. Product number BR450 × 250 × 100. Ensure safe truck reversing into the loading dock, protect the building walls. For mounting dimensions, please, refer to drawings

Molded rubber bumpers 450 × 250 × 100 mm. Standard. Product number BR450 × 250 × 100. Ensure safe truck reversing into the loading dock, protect the building walls. For mounting dimensions, please, refer to drawings

Molded rubber bumpers 510 × 250 × 330 mm (external dimensions), console type. Based on rubber bumper 450 × 250 × 100 mm. Product number BRC510х250х330. Ensure safe truck reversing into the loading dock, protect the building walls. Used when truck load bed is higher than the ramp. For mounting dimensions, please, refer to drawings

Molded rubber bumpers 510 × 250 × 330 mm (external dimensions), console type. Based on rubber bumper 450 × 250 × 100 mm. Product number BRC510х250х330. Ensure safe truck reversing into the loading dock, protect the building walls. Used when truck load bed is higher than the ramp. For mounting dimensions, please, refer to drawings

Molded rubber bumpers 610 × 250 × 175. (external dimensions), moving. Based on rubber bumper 450 × 250 × 100 mm. Product number BRM610×250×175. Move up and down following vehicle raising and lowering as the suspension floats during the loading/unloading cycle. Has greater service life. Can be used only with dock leveler with 1 000 mm telescopic lip. For mounting dimensions, please, refer to drawings

Molded rubber bumpers 610 × 250 × 175. (external dimensions), moving. Based on rubber bumper 450 × 250 × 100 mm. Product number BRM610×250×175. Move up and down following vehicle raising and lowering as the suspension floats during the loading/unloading cycle. Has greater service life. Can be used only with dock leveler with 1 000 mm telescopic lip. For mounting dimensions, please, refer to drawings

Molded rubber bumpers 600 × 364 × 110 mm (external dimensions), moving. Based on rubber bumper 450 × 250 × 100 mm. Product number BRM600×364×110. Moves up and down following vehicle raising and lowering as the suspension floats during the loading/unloading cycle. Have greater service life. Can be used only with dock levelers with 1 000 mm telescopic lip. For mounting dimensions, please, refer to drawings

Molded rubber bumpers 600 × 364 × 110 mm (external dimensions), moving. Based on rubber bumper 450 × 250 × 100 mm. Product number BRM600×364×110. Moves up and down following vehicle raising and lowering as the suspension floats during the loading/unloading cycle. Have greater service life. Can be used only with dock levelers with 1 000 mm telescopic lip. For mounting dimensions, please, refer to drawings

Steel face dock bumpers 465 × 250 × 165 mm (external dimensions) with 16 mm steel plate. Based on rubber bumper 450 × 250 × 100 mm. Product number BRSP(16)465×250×165. Consist of a rubber bumper 450 × 250 × 100 mm covered with durable steel plate. For mounting dimensions, please, refer to drawings

Steel face dock bumpers 465 × 250 × 165 mm (external dimensions) with 16 mm steel plate. Based on rubber bumper 450 × 250 × 100 mm. Product number BRSP(16)465×250×165. Consist of a rubber bumper 450 × 250 × 100 mm covered with durable steel plate. For mounting dimensions, please, refer to drawings

Steel face dock bumpers 465 × 250 × 165 mm (external dimensions) with 16 mm steel plate and parking sensor. Based on rubber bumper 450 × 250 × 100 mm. Product number BRSP(16)465×250×165S. Consists of a rubber bumper 450 × 250 × 100 mm covered with durable steel plate and parking sensor. Steel face improves life expectancy of the rubber bumper and protects it from damaging by parking vehicle and during loading/unloading cycle. Manufacturer’s warranty doesn’t cover steel plate replacement in case of wear and deformation due to its extreme abnormal wear. These dock bumpers are used together with parking radar. For mounting dimensions, please, refer to drawings

Steel face dock bumpers 465 × 250 × 165 mm (external dimensions) with 16 mm steel plate and parking sensor. Based on rubber bumper 450 × 250 × 100 mm. Product number BRSP(16)465×250×165S. Consists of a rubber bumper 450 × 250 × 100 mm covered with durable steel plate and parking sensor. Steel face improves life expectancy of the rubber bumper and protects it from damaging by parking vehicle and during loading/unloading cycle. Manufacturer’s warranty doesn’t cover steel plate replacement in case of wear and deformation due to its extreme abnormal wear. These dock bumpers are used together with parking radar. For mounting dimensions, please, refer to drawings

Steel face dock bumpers 460 × 250 × 160 mm (external dimensions) with 10 mm steel plate. Based on rubber bumper 450 × 250 × 100 mm. Product number BRSP(10)460×250×160. Consist of a rubber bumper 450 × 250 × 100 mm covered with durable steel plate. For mounting dimensions, please, refer to drawings

Steel face dock bumpers 460 × 250 × 160 mm (external dimensions) with 10 mm steel plate. Based on rubber bumper 450 × 250 × 100 mm. Product number BRSP(10)460×250×160. Consist of a rubber bumper 450 × 250 × 100 mm covered with durable steel plate. For mounting dimensions, please, refer to drawings

Steel face dock bumpers 500 × 255 × 205 (external dimensions) with damper insert. Based on rubber bumper 450 × 250 × 100 mm. Product number BS500×255×205. It’s a hybrid device combining moving bumper and steel plate bumper. Consist of a holder, a rubber crumb damper insert and a moving steel plate following truck bed movement. Steel face improves life expectancy of the rubber bumper and protects it from damaging by parking vehicle and during loading/unloading cycle. Manufacturer’s warranty doesn’t cover steel plate replacement in case of wear and deformation due to its extreme abnormal wear. Can be used only with dock leveler with 1 000 mm telescopic lip For mounting dimensions, please, refer to drawings

Steel face dock bumpers 500 × 255 × 205 (external dimensions) with damper insert. Based on rubber bumper 450 × 250 × 100 mm. Product number BS500×255×205. It’s a hybrid device combining moving bumper and steel plate bumper. Consist of a holder, a rubber crumb damper insert and a moving steel plate following truck bed movement. Steel face improves life expectancy of the rubber bumper and protects it from damaging by parking vehicle and during loading/unloading cycle. Manufacturer’s warranty doesn’t cover steel plate replacement in case of wear and deformation due to its extreme abnormal wear. Can be used only with dock leveler with 1 000 mm telescopic lip For mounting dimensions, please, refer to drawings

Steel face dock bumpers 800 × 255 × 205 (external dimensions) with damper insert. Based on rubber bumper 450 × 250 × 100 mm. Product number BS800×255×205. It’s a hybrid device combining moving bumper and steel plate bumper. Consist of a holder, a rubber crumb damper insert and a moving steel plate following truck bed movement. Steel face improves life expectancy of the rubber bumper and protects it from damaging by parking vehicle and during loading/unloading cycle. Manufacturer’s warranty doesn’t cover steel plate replacement in case of wear and deformation due to its extreme abnormal wear. Can be used only with dock leveler with 1 000 mm telescopic lip For mounting dimensions, please, refer to drawings

Steel face dock bumpers 800 × 255 × 205 (external dimensions) with damper insert. Based on rubber bumper 450 × 250 × 100 mm. Product number BS800×255×205. It’s a hybrid device combining moving bumper and steel plate bumper. Consist of a holder, a rubber crumb damper insert and a moving steel plate following truck bed movement. Steel face improves life expectancy of the rubber bumper and protects it from damaging by parking vehicle and during loading/unloading cycle. Manufacturer’s warranty doesn’t cover steel plate replacement in case of wear and deformation due to its extreme abnormal wear. Can be used only with dock leveler with 1 000 mm telescopic lip For mounting dimensions, please, refer to drawings

Technical description
Size Table
Construction
Specifications
Operating Conditions
Parameters
Value
Height, mm
3 300; 3 800; 4 900
Width, mm
3 410; 3 610
  1. Dock shelter body (two sides and top)
  2. Blower
  3. Blocks of counterweight
  4. Counterweight
  5. Side airbag
  6. Front protection curtain
  7. Counterweight shaft
  8. Top airbag
Parameter Value Notes
Length, mm 800
Width, mm 0,9
Panel colour RAL 9003 (Signal white)
Profiles colour RAL 9006 (White aluminium)
Colour Black
Control Switch

Prior to operation carefully inspect the dock shelter. Never use it in case any damage found.

Position the trailer in the middle of the dock shelter so that the distances between trailer’s body and shelter sides are equal on both sides. Back the trailer slowly till it presses dock bumpers.

Make sure the truck is stationary, the handbrake is put on, the wheels are choked.

Switch the blower on by pressing a push-button on the control unit. In 30 seconds the dock shelter will be inflated and will tightly wrap the truck body.

Switch the blower off after loading/unloading operations are completed. The trailer should exit the loading dock only after air bags are completely stored.

Attention! The blower should be on during whole loading/unloading cycle.

Equipment
Standard
Side airbag

Side airbag

Front airbag

Front airbag

Optional
Top airbag extension 1 200 mm

Top airbag extension 1 200 mm

Wheel guides

Wheel guides

Safety fences

Safety fences

Shock column

Shock column

Molded rubber bumpers 250 × 250 × 100 mm. Standard. Product number BR250 × 250 × 100. Ensure safe truck reversing into the loading dock, protect the building walls. For mounting dimensions, please, refer to drawings

Molded rubber bumpers 250 × 250 × 100 mm. Standard. Product number BR250 × 250 × 100. Ensure safe truck reversing into the loading dock, protect the building walls. For mounting dimensions, please, refer to drawings

Molded rubber bumpers 450 × 250 × 100 mm. Standard. Product number BR450 × 250 × 100. Ensure safe truck reversing into the loading dock, protect the building walls. For mounting dimensions, please, refer to drawings

Molded rubber bumpers 450 × 250 × 100 mm. Standard. Product number BR450 × 250 × 100. Ensure safe truck reversing into the loading dock, protect the building walls. For mounting dimensions, please, refer to drawings

Molded rubber bumpers 510 × 250 × 330 mm (external dimensions), console type. Based on rubber bumper 450 × 250 × 100 mm. Product number BRC510х250х330. Ensure safe truck reversing into the loading dock, protect the building walls. Used when truck load bed is higher than the ramp. For mounting dimensions, please, refer to drawings

Molded rubber bumpers 510 × 250 × 330 mm (external dimensions), console type. Based on rubber bumper 450 × 250 × 100 mm. Product number BRC510х250х330. Ensure safe truck reversing into the loading dock, protect the building walls. Used when truck load bed is higher than the ramp. For mounting dimensions, please, refer to drawings

Molded rubber bumpers 610 × 250 × 175. (external dimensions), moving. Based on rubber bumper 450 × 250 × 100 mm. Product number BRM610×250×175. Move up and down following vehicle raising and lowering as the suspension floats during the loading/unloading cycle. Has greater service life. Can be used only with dock leveler with 1 000 mm telescopic lip. For mounting dimensions, please, refer to drawings

Molded rubber bumpers 610 × 250 × 175. (external dimensions), moving. Based on rubber bumper 450 × 250 × 100 mm. Product number BRM610×250×175. Move up and down following vehicle raising and lowering as the suspension floats during the loading/unloading cycle. Has greater service life. Can be used only with dock leveler with 1 000 mm telescopic lip. For mounting dimensions, please, refer to drawings

Molded rubber bumpers 600 × 364 × 110 mm (external dimensions), moving. Based on rubber bumper 450 × 250 × 100 mm. Product number BRM600×364×110. Moves up and down following vehicle raising and lowering as the suspension floats during the loading/unloading cycle. Have greater service life. Can be used only with dock levelers with 1 000 mm telescopic lip. For mounting dimensions, please, refer to drawings

Molded rubber bumpers 600 × 364 × 110 mm (external dimensions), moving. Based on rubber bumper 450 × 250 × 100 mm. Product number BRM600×364×110. Moves up and down following vehicle raising and lowering as the suspension floats during the loading/unloading cycle. Have greater service life. Can be used only with dock levelers with 1 000 mm telescopic lip. For mounting dimensions, please, refer to drawings

Steel face dock bumpers 465 × 250 × 165 mm (external dimensions) with 16 mm steel plate. Based on rubber bumper 450 × 250 × 100 mm. Product number BRSP(16)465×250×165. Consist of a rubber bumper 450 × 250 × 100 mm covered with durable steel plate. For mounting dimensions, please, refer to drawings

Steel face dock bumpers 465 × 250 × 165 mm (external dimensions) with 16 mm steel plate. Based on rubber bumper 450 × 250 × 100 mm. Product number BRSP(16)465×250×165. Consist of a rubber bumper 450 × 250 × 100 mm covered with durable steel plate. For mounting dimensions, please, refer to drawings

Steel face dock bumpers 465 × 250 × 165 mm (external dimensions) with 16 mm steel plate and parking sensor. Based on rubber bumper 450 × 250 × 100 mm. Product number BRSP(16)465×250×165S. Consists of a rubber bumper 450 × 250 × 100 mm covered with durable steel plate and parking sensor. Steel face improves life expectancy of the rubber bumper and protects it from damaging by parking vehicle and during loading/unloading cycle. Manufacturer’s warranty doesn’t cover steel plate replacement in case of wear and deformation due to its extreme abnormal wear. These dock bumpers are used together with parking radar. For mounting dimensions, please, refer to drawings

Steel face dock bumpers 465 × 250 × 165 mm (external dimensions) with 16 mm steel plate and parking sensor. Based on rubber bumper 450 × 250 × 100 mm. Product number BRSP(16)465×250×165S. Consists of a rubber bumper 450 × 250 × 100 mm covered with durable steel plate and parking sensor. Steel face improves life expectancy of the rubber bumper and protects it from damaging by parking vehicle and during loading/unloading cycle. Manufacturer’s warranty doesn’t cover steel plate replacement in case of wear and deformation due to its extreme abnormal wear. These dock bumpers are used together with parking radar. For mounting dimensions, please, refer to drawings

Steel face dock bumpers 460 × 250 × 160 mm (external dimensions) with 10 mm steel plate. Based on rubber bumper 450 × 250 × 100 mm. Product number BRSP(10)460×250×160. Consist of a rubber bumper 450 × 250 × 100 mm covered with durable steel plate. For mounting dimensions, please, refer to drawings

Steel face dock bumpers 460 × 250 × 160 mm (external dimensions) with 10 mm steel plate. Based on rubber bumper 450 × 250 × 100 mm. Product number BRSP(10)460×250×160. Consist of a rubber bumper 450 × 250 × 100 mm covered with durable steel plate. For mounting dimensions, please, refer to drawings

Steel face dock bumpers 500 × 255 × 205 (external dimensions) with damper insert. Based on rubber bumper 450 × 250 × 100 mm. Product number BS500×255×205. It’s a hybrid device combining moving bumper and steel plate bumper. Consist of a holder, a rubber crumb damper insert and a moving steel plate following truck bed movement. Steel face improves life expectancy of the rubber bumper and protects it from damaging by parking vehicle and during loading/unloading cycle. Manufacturer’s warranty doesn’t cover steel plate replacement in case of wear and deformation due to its extreme abnormal wear. Can be used only with dock leveler with 1 000 mm telescopic lip For mounting dimensions, please, refer to drawings

Steel face dock bumpers 500 × 255 × 205 (external dimensions) with damper insert. Based on rubber bumper 450 × 250 × 100 mm. Product number BS500×255×205. It’s a hybrid device combining moving bumper and steel plate bumper. Consist of a holder, a rubber crumb damper insert and a moving steel plate following truck bed movement. Steel face improves life expectancy of the rubber bumper and protects it from damaging by parking vehicle and during loading/unloading cycle. Manufacturer’s warranty doesn’t cover steel plate replacement in case of wear and deformation due to its extreme abnormal wear. Can be used only with dock leveler with 1 000 mm telescopic lip For mounting dimensions, please, refer to drawings

Steel face dock bumpers 800 × 255 × 205 (external dimensions) with damper insert. Based on rubber bumper 450 × 250 × 100 mm. Product number BS800×255×205. It’s a hybrid device combining moving bumper and steel plate bumper. Consist of a holder, a rubber crumb damper insert and a moving steel plate following truck bed movement. Steel face improves life expectancy of the rubber bumper and protects it from damaging by parking vehicle and during loading/unloading cycle. Manufacturer’s warranty doesn’t cover steel plate replacement in case of wear and deformation due to its extreme abnormal wear. Can be used only with dock leveler with 1 000 mm telescopic lip For mounting dimensions, please, refer to drawings

Steel face dock bumpers 800 × 255 × 205 (external dimensions) with damper insert. Based on rubber bumper 450 × 250 × 100 mm. Product number BS800×255×205. It’s a hybrid device combining moving bumper and steel plate bumper. Consist of a holder, a rubber crumb damper insert and a moving steel plate following truck bed movement. Steel face improves life expectancy of the rubber bumper and protects it from damaging by parking vehicle and during loading/unloading cycle. Manufacturer’s warranty doesn’t cover steel plate replacement in case of wear and deformation due to its extreme abnormal wear. Can be used only with dock leveler with 1 000 mm telescopic lip For mounting dimensions, please, refer to drawings

Technical description
Size Table
Parameters
Value
Height, mm
3 300; 3 800; 4 900
Width, mm
3 410; 3 610
Construction
  1. Dock shelter body (two sides and top)
  2. Blower
  3. Blocks of counterweight
  4. Counterweight
  5. Side airbag
  6. Front protection curtain
  7. Counterweight shaft
  8. Top airbag
Specifications
Parameter Value Notes
Length, mm 800
Width, mm 0,9
Panel colour RAL 9003 (Signal white)
Profiles colour RAL 9006 (White aluminium)
Colour Black
Control Switch
Operating Conditions

Prior to operation carefully inspect the dock shelter. Never use it in case any damage found.

Position the trailer in the middle of the dock shelter so that the distances between trailer’s body and shelter sides are equal on both sides. Back the trailer slowly till it presses dock bumpers.

Make sure the truck is stationary, the handbrake is put on, the wheels are choked.

Switch the blower on by pressing a push-button on the control unit. In 30 seconds the dock shelter will be inflated and will tightly wrap the truck body.

Switch the blower off after loading/unloading operations are completed. The trailer should exit the loading dock only after air bags are completely stored.

Attention! The blower should be on during whole loading/unloading cycle.

Checkout
Managers of the company will answer all
questions by phone:
+420 474 319 111
CALL BACK