Drive, limit switches, release key, fasteners
Safety photocells PHOTOCELL-N, consisting of an infrared transmitter and receiver
PHOTOCELL-PRO wireless safety photocells with swivel board for asymmetric openings, consisting of an infrared transmitter and receiver
WI-FI-module is designed for wireless control (generation of NO control signal) by electric drives
The GSM module is designed to receive a signal from a phone and transmit a control command to start an electric drive or a barrier
The TRANSMITTER 2-PRO-BLACK remote controller is designed for remote control of two automatic devices
The TRANSMITTER 4-PRO-BLACK remote controller is designed for remote control of four automatic devices
Color remotes TRANSMITTER 4-COLOR are designed for remote control of four automatic devices
Wireless control button COMMAND-433 is designed for remote control of two automatic devices
The KEYPAD code keyboard is designed for remote control of the gate electric drive equipped with a built-in or external DoorHan receiver.
The key-button KEYSWITCH_N is used to send a control command to the control unit of the automatic system by turning the key
ANTENA-433 is used for signal amplification when there are obstacles between the receiver and transmitter
LED signal lamp with antenna LAMP-PRO is designed to signal the movement of the door
SIRENA is designed for sound notification of the door movement
The HEATER is designed for heating electric door drives and barriers when operating at low temperatures
Drive mounting platform SLIDING-5000
Before installing the drive, make sure that the door operates smoothly. It must be ensured that the place of operation corresponds in terms of its climatic conditions to the characteristics of the drive. It is forbidden to install the equipment in rooms with flammable substances or hazardous environments. Make sure that there is no entrapment of objects between the moving and fixed parts of the drive when the gate is moving. It is important to use additional accessories only from DoorHan in order to avoid damage to the drive. Do not leave the motor in a disengaged state. Do not use the drive if it needs to be repaired or adjusted. Make sure that there are no foreign objects in the area of the electric drive before starting it. Passage and passage through the gate is only permitted when the drive is switched off. It is forbidden to use the drive and accessories by children. It is forbidden to make changes to the automatic part.
The pedestrian passage function allows the door to be opened by 1 m for the passage in the absence of a door.
The built-in control unit allows you to connect many additional accessories.
A manual chain hoist is installed in the drive, which allows you to open the door manually in the event of a power failure.
Powerful motor with built-in forced cooling ensures 100% drive performance.
Drive, limit switches, release key, fasteners
Safety photocells PHOTOCELL-N, consisting of an infrared transmitter and receiver
PHOTOCELL-PRO wireless safety photocells with swivel board for asymmetric openings, consisting of an infrared transmitter and receiver
WI-FI-module is designed for wireless control (generation of NO control signal) by electric drives
The GSM module is designed to receive a signal from a phone and transmit a control command to start an electric drive or a barrier
The TRANSMITTER 2-PRO-BLACK remote controller is designed for remote control of two automatic devices
The TRANSMITTER 4-PRO-BLACK remote controller is designed for remote control of four automatic devices
Color remotes TRANSMITTER 4-COLOR are designed for remote control of four automatic devices
Wireless control button COMMAND-433 is designed for remote control of two automatic devices
The KEYPAD code keyboard is designed for remote control of the gate electric drive equipped with a built-in or external DoorHan receiver.
The key-button KEYSWITCH_N is used to send a control command to the control unit of the automatic system by turning the key
ANTENA-433 is used for signal amplification when there are obstacles between the receiver and transmitter
LED signal lamp with antenna LAMP-PRO is designed to signal the movement of the door
SIRENA is designed for sound notification of the door movement
The HEATER is designed for heating electric door drives and barriers when operating at low temperatures
Drive mounting platform SLIDING-5000
Before installing the drive, make sure that the door operates smoothly. It must be ensured that the place of operation corresponds in terms of its climatic conditions to the characteristics of the drive. It is forbidden to install the equipment in rooms with flammable substances or hazardous environments. Make sure that there is no entrapment of objects between the moving and fixed parts of the drive when the gate is moving. It is important to use additional accessories only from DoorHan in order to avoid damage to the drive. Do not leave the motor in a disengaged state. Do not use the drive if it needs to be repaired or adjusted. Make sure that there are no foreign objects in the area of the electric drive before starting it. Passage and passage through the gate is only permitted when the drive is switched off. It is forbidden to use the drive and accessories by children. It is forbidden to make changes to the automatic part.
The pedestrian passage function allows the door to be opened by 1 m for the passage in the absence of a door.
The built-in control unit allows you to connect many additional accessories.
A manual chain hoist is installed in the drive, which allows you to open the door manually in the event of a power failure.
Powerful motor with built-in forced cooling ensures 100% drive performance.
